Proper Care Of A Cement Mixer

The use of a cement mixer is typically associated with a project that is labor-intensive. Therefore, it is in the best interest of the person in charge of the project to learn proper cleaning and maintenance procedures so that he or she is not faced with an almost impossible task at the end of a long day. Fortunately, there are tips one can follow to clean such machinery and rid it of cement buildup so that it is returned to its former condition and ready for future use.Cement Mixer

Gravel and Water Cleaning Method

Using water and gravel is the quickest and easiest way to thoroughly clean a cement mixer. In addition, this method is inexpensive and does not involve the use of dangerous chemicals. One should begin by placing two scoops of gravel and approximately three gallons of water into the mixer’s drum. If one is good at visually estimating liquid volume, he or she should use a garden hose to add the water, as this will ensure the best results. After these components have been added, the cement mixer should be turned on and the gravel and water rotated for approximately ten to fifteen minutes. It is essential to adjust the drum’s angle so that the mixture tumbles up toward the machine’s top edge. This is the best way to ensure that the drum is thoroughly cleaned by the end of the process.

The mixture of water and gravel should then be emptied into a wheelbarrow or other practical conveyance and disposed of in an appropriate area designed for the dumping of such material. Any time this method is used, it is important to make sure clean, fresh gravel is available. Using muddy or otherwise dirtied gravel is counterproductive. After the water and gravel are removed and disposed of, any leftover sediment or gravel dust should be sprayed out of the empty drum with a powerful hose and the cement mixer should be allowed to dry naturally in the open air before it is transported to its regular storage area.

Maintenance Tips

Lightly coating the outside of the mixer with a grease product will help prevent the buildup of cement on its surface. However, if the cement mixer is borrowed or rented, it is important to check with the owner or manufacture before this substance is applied, as they may have instructions or preferences concerning such products.

Another helpful tip is to lightly coat the interior of the drum with diesel fuel prior to mixing cement. This will help prevent the cement from sticking to the drum. However, diesel fuel can change the composition of cement, eventually breaking it down and ruining its natural consistency, and therefore the diesel fuel should be used sparingly.

Everyone who uses a cement mixer should check its various components each time it is turned on and again at shutdown time. It is important not to overlook checking the mixer blade to ensure that it has not become bent. If so, it will need to be replaced. Finally, when in doubt, it is in the best interest of every consumer to contact the manufacturer for additional cleaning and maintenance instructions. Contact Kushlan Products today with any questions about maintenance of your cement mixer.

Comments are closed.